One Tooth® Wood Hole Cutters
Fewer Teeth=More Speed
Ask anyone who's seen 'em BLAST through wood!

   

The LENOX® Advantage (link to mfg. site)

  • 2" cutting depth - deep enough to go through a 2 x 6" plus 1/2" plywood
  • 3 Times faster than regular hole saws 
  • Safer/less torque than self feed bits, therefore...
    -Causes less fatigue on the user
    -Can be run on lower power machines
    -Can also run at higher speeds (up to 1200 rpm)
  • Easy plug ejection
  • Cuts wet, frozen, treated & hard wood with no binding (unlike self-feed bits)
  • Resharpenable - over 300 holes before resharpening is even needed
701G     LEN 25477

11PC 1-Tooth Hole Cutter Set
 Blowout sale

was  45995           now - only 33995 includes:

    2-1/8 (54mm) (used for: 1-1/2" (38mm) pipe, lock installation)
    2-1/4 (57mm) (used for: 1-1/2" (38mm) pipe)
    2-9/16 (65mm) (used for: 2" (51mm) pipe)
    2-3/4 (70mm) (used for: 2" (51mm) pipe)
    3-5/8 (92mm) (used for: 3" (76mm) duct pipe & bendable duct pipe)
    4" (102mm) (used for: 3" (76mm) pipe & coupling, dryer vent)
    4-5/8 (117mm) (used for: 4" (102mm) pipe)
    2L Arbor
    2pcs - 3/8" Stubby spade bits

 

  + Diamond file for Re-sharpening